Tin/Metal Roof Mount Kit for Starlink Standard (Gen 3 / V4)

Specifications

✅ Compatibility note: This product suits the Starlink Standard (Gen 3 / V4) flat rectangular terminal, also commonly called Standard Kit, Standard 4 or V4. It does not suit Starlink Mini, Gen 2 actuated Standard, High Performance or Flat High Performance models unless specifically stated.

Starlink Standard (Gen 3 / V4) Tin Roof Mount Kit Aluminium Pole Adapter Included

These are to suit the Starlink Standard (Gen 3 / V4) receiver model is UTA-232

📦 What’s included

• 1 x Standard (Gen 3 / V4) Aluminium Pole Adaptor & Grub Screws
• 2 x Structural Telescopic Stay Bars (Galvanised Steel)
• 1 x Aluminium Base Plate (270mm x 75mm)
• 1 x Aluminium Pole Mast (choice of length) 
• Generic Fixings Pack (please check suitability for your specific install) 

🛰️ Starlink terminal not included. This product includes Spacetek accessories only; purchase your Starlink kit separately from here.

About the Stay Bars:
Our stay bars come in male / female pairs and can be extended or shortened depending on the mounting angle for the supporting roof structure. Our 1.5m pole kit has our standard size support bars and the 0.6m have shorter overall length.  Our standard size (for the 1m and 1.5m kits) are 950mm pairs so they can extend out to aprox 1.5 meters each side. The 0.6m kit has stay bars that extend to roughly 1m each side. 

The Spacetek Tin Roof Mount Kit is engineered for fixed installation of the Starlink Gen 3 (V4 - Latest) rectangular terminal on corrugated roofing. The system provides a rigid, elevated mounting point while maintaining separation from the roof surface to reduce radiant heat exposure and improve airflow around the terminal.

This bundle includes our standard powder coated Gen 3 aluminium adaptor.  For higher resistance to weather, you can consider our Starlink Heavy Duty Tin Roof Kit for Gen 3 (V4). 

Starlink Standard (Gen 3 / V4) terminals incorporate a thermal protection shut-off at approximately 50°C. The elevated pole design intentionally spaces the dish away from heat radiating from metal roofing during Australian summer conditions, reducing thermal load and helping maintain uninterrupted operation.

Key Features

✅ Gen 3 (V4) Compatibility - Designed specifically for the Starlink Gen 3 rectangular terminal and mast interface.

✅ Corrugated Metal Roof Design - Geometry suited to metal roofing profiles commonly used on Australian homes and sheds.

✅ Heat & Airflow Clearance - Elevated mounting height reduces exposure to roof radiated heat during high-temperature conditions.

✅ Standard Aluminium Pole Adaptor Included - Precision-machined adapter ensures correct mast alignment and secure retention.

✅ Extended Height Options - Longer variants provide improved line-of-sight and space for secondary antennas or accessories.

Installation Overview (also see video below)

Please find our complete installation guide here: https://help.spacetek.com.au/en/articles/1784541761-starlink-gen-3-standard-4-tin-roof-mount-guide

Reference Video:
A step-by-step tripod erection and mounting process is demonstrated in the official installation video (Gen 2 Starlink is shown for reference only). Use the same procedure for Gen 3 (V4) with the supplied SPACETEK pole adapter which goes over the top of the end of the mast). See our guide for more details. 

Important Notes

⚠️ Not suitable for ground, freestanding, or portable installation.
⚠️ Roof penetrations must be sealed to prevent water ingress.
⚠️ Ensure installation is performed on structurally sound roofing only.
⚠️ Professional installation is recommended for rooftop applications.