High Quality Shielded 24AWG CAT5E Patch Lead

Description

Heavy Duty Shielded CAT5E (CAT6A) Patch Leads

The Spacetek Heavy Duty Shielded CAT5E Patch Lead is engineered for demanding networking and Starlink installations where durability, shielding integrity, and PoE reliability are critical. While formally classified as CAT5E due to the absence of an internal plastic spline, the cable is manufactured to CAT6A construction standards in all other aspects, delivering enhanced performance over standard CAT5E leads.

Designed for Australian conditions, this patch lead features robust shielding, UV-tolerant jacketing, and stranded 24AWG conductors. It is suitable for indoor, in-wall, and outdoor routing where vibration, electrical noise, and environmental exposure are present.

⚠️ This is a data cable only. It is not a structural or load-bearing component.

Key Features

✔️ Heavy Duty Shielded Construction — Full shielding reduces electromagnetic interference (EMI) and crosstalk in electrically noisy environments.

✔️ CAT6A-Grade Build Quality — Manufactured to CAT6A standards apart from the internal divider, delivering performance beyond typical CAT5E cables.

✔️ 24AWG Stranded Conductors — Stranded copper design improves durability in high-vibration or movement-prone installations.

✔️ PoE Optimised — Low resistance conductors support stable Power over Ethernet delivery with reduced voltage drop.

✔️ UV-Rated Outer Jacket — Suitable for external routing and long-term exposure to sunlight.

✔️ Starlink-Ready Performance — Exceeds typical Starlink cable construction standards for reliability in residential and commercial deployments.

Specifications

• Cable Type: Shielded Ethernet patch lead

• Category Rating: CAT5E (CAT6A-grade construction)

• Conductor Size: 24AWG stranded copper

• Shielding: Full shielded design (EMI and crosstalk reduction)

• Jacket Rating: UV-tolerant, outdoor rated

• PoE Support: Yes (PoE / PoE+)

• Connector Type: RJ45

• Intended Use: Data and PoE transmission only

Installation Overview

1. Plan cable routing to avoid sharp edges and heat sources.

2. Maintain appropriate bend radius during installation.

3. Route cable through conduits or protective channels where exposed.

4. Secure cable using non-compressive clips or ties.

5. Connect RJ45 ends firmly until fully seated.

6. Verify data and PoE performance before finalising installation.

Important Notes

⚠️ Do not exceed recommended bend radius during installation.
⚠️ Avoid crushing, kinking, or over-tightening cable fasteners.
⚠️ Ensure correct strain relief at connection points.
⚠️ Spacetek is not liable for damage caused by improper routing or electrical non-compliance.

Ideal Use Cases

✅ Starlink terminal and router connections
✅ Outdoor and in-wall Ethernet runs
✅ PoE devices such as access points and cameras
✅ High-vibration environments
✅ Electrically noisy installations