Starlink Mini Truck Bundle - R6260 Compatible, Power, Mount, Cables, Housing, IP68

Description

Starlink Mini Compatible Truck Bundle - R6260 mount solution with rugged Starlink housing, cables, power and switching. 

A permanent, vehicle-rated in-motion system engineered for trucks, Red Dot R6260 air-conditioning units, commercial fleets and mining vehicles providing IP68 protection for your Starlink Mini and components in harsh envrionments. 

Kit Inclusions: 

• 1 x Starlink Mini V-Cell rugged enclosure kit - IP68 Mine Spec. 
• 2 x IP68 Bulkhead Sockets for DC Power and RJ45 Data for the V-Cell.
  
• 2 x Starlink Mini DC Power Cables (Short & Long). 
• 1 x Starlink Gen 3, RJ45 Cable (0.5m for internal V-Cell connection ONLY) *note below TIP 💡
• 1 x Certified Regulated DC Voltage Booster 12v to 35v in Anderson configuration.
• 1 x Illuminated Sattelite Rocker Switch
• Fastener Pack (please double check suitability for your specific install) 

* The Starlink Mini receiver unit is not included 

Tip 💡:  If you want to by-pass the Starlink Mini's integrated router & wifi, or simply connect to the Starlink Mini in LAN mode, a longer data cable (Gen 3 RJ45) will also be required (this is not included in this bundle) but can be purchased here.

⚠️ Use in motion is at your own risk.
⚠️ Professional installation is recommended for all in-motion systems.

Key Features

✔️ R6260-Compatible Vehicle Mount — Powder-coated aluminium mount engineered for the Red Dot R6260 footprint used widely across trucking and mining fleets. Provides a rigid, vibration-resistant structural interface.

✔️ Mini V-Cell Mine-Spec Housing — Fully enclosed, impact-resistant housing that shields the Starlink Mini from dust, debris, wind load and continuous vibration.

✔️ Certified 35V Regulated Power Booster — Converts 12–30 V vehicle supply to a stable 35V output suitable for in-motion Mini operation.

✔️ Heavy-Duty DC Cabling Set — Includes 0.5m and 2m cables with thick insulation suitable for automotive routing paths.

✔️ IP68 Bulkhead Sockets (x2) — Waterproof, vibration-secure pass-through for protected DC & Data (optional) entry into the housing or vehicle bodywork.

✔️ Illuminated 3-Pole Rocker Switch — Provides clear on/off control for vehicle-mounted Starlink Mini systems.

Specifications

• Mount Compatibility: Red Dot R6260 platform

• Housing Type: V-Cell mine-spec enclosure

• Power Booster Output: 35 V regulated DC

• Input Voltage Range: 12–30 V DC

• DC Cabling: 0.5 m + 2 m heavy-duty automotive cable

• Socket Rating: IP68 waterproof bulkhead

• Switch: 3-pole illuminated rocker

• Intended Use: Vehicle-mounted Starlink Mini systems (in-motion capable)
  

Installation Overview

1. Confirm the Red Dot R6260 platform is structurally sound and free of obstruction.

2. Position the mount and secure using vehicle-rated fasteners.

3. Install the V-Cell housing onto the mount and torque all fixings.

4. Route DC & Data cabling through protected automotive pathways.

5. Fit the IP68 bulkhead socket through the chosen sealed pass-through.

6. Connect the 35V regulator to the 12–30V vehicle supply and verify polarity.

7. Install the 3-pole rocker switch in an accessible cabin location.

8. Perform final vibration and stability checks before operating in motion.

Important Notes

⚠️ Use in motion must comply with all vehicle load and road regulations.
⚠️ Secondary safety restraints are recommended where practical.
⚠️ Spacetek is not liable for improper installation or non-compliant electrical routing.
⚠️ Do not modify the housing or mount.

Ideal Use Cases

✅ Long-haul trucking
✅ Mining and heavy plant
✅ Remote commercial fleets
✅ Emergency services vehicles
✅ Field service and maintenance operations
✅ Industrial and utility vehicles requiring permanent connectivity