Starlink Cable Bulkhead Coupler – RJ45 & Mini DC Pass-Through

Specifications

Create a sealed pass-through point for Starlink or network cabling with a weather-resistant bulkhead coupler. This product is designed for installations where a cable needs to pass through a wall, panel, canopy, caravan, enclosure or equipment box while keeping the entry point neat and protected.

Select the correct variant for your cable type. Starlink Gen 2, Starlink Standard (Gen 3 / V4) and Starlink Mini DC setups can use different cable/connector styles, so the variant choice matters.

Choose the Right Variant

Common Use Cases

🚐 Caravan and RV wall penetrations
Create a cleaner external-to-internal cable pass-through for Starlink or network cabling.

🚙 Canopies, trailers and 4WD fit-outs
Pass cable through a panel or equipment box without leaving a loose cable through an open hole.

🏠 Home, shed and office installs
Use as a neat panel-mounted joiner where cable needs to pass through a wall or enclosure.

🧰 Outdoor equipment enclosures
Provide a sealed connection point for compatible data or DC cabling.

Compatibility

For Starlink Standard (Gen 3 / V4), also called Standard Kit, Standard 4 or V4, choose the Gen 3 Standard 4 CAT6A RJ45 variant when using RJ45-style cabling. Gen 2 SPX cable installations require modification/termination to RJ45 if using the Gen 2 CAT6A RJ45 version. Starlink Mini DC installs require the Mini DC-DC variant.

Key Features

• Weather-resistant cable pass-through helps protect wall, panel and enclosure penetrations from dust and water ingress when installed correctly.
• Cleaner install finish than pushing a cable through an open hole.
• Multiple Starlink-compatible variants for Gen 3 / V4 RJ45, modified Gen 2 RJ45, or Starlink Mini DC applications.
• Suitable for fixed panels and enclosures including caravans, RVs, canopies, sheds and equipment boxes.

What's Included

📦 1 × Starlink cable bulkhead coupler/pass-through in your selected variant

Installation Overview

1. Confirm the correct variant for your cable type before drilling or cutting.
2. Select a suitable flat mounting surface and check clearance behind the panel.
3. Cut or drill the required opening for the bulkhead fitting.
4. Install the coupler and tighten/seal according to the application.
5. Connect and test the cable before final weatherproofing.

Important Notes

⚠️ Variant selection matters. Check your Starlink model and cable type before ordering.
⚠️ Weather resistance depends on correct installation, cable fitment, sealing and panel surface condition.
⚠️ Gen 2 SPX cable modification should only be done if you are comfortable terminating shielded RJ45 plugs correctly.
⚠️ Do not drill into vehicles, caravans or structures until fitment and cable clearance have been confirmed.