Starlink Mini Tripod Battery Stand – 99.9Wh / 27,000mAh

Specifications

Portable Starlink Mini power and a tripod stand in one

Set up your Starlink Mini away from mains power without carrying a separate stand and power station. The rechargeable 99.9Wh lithium-ion battery is built into a freestanding tripod base and supplies 30V DC through the included Starlink Mini power cable.

Use it for campsites, remote walks, field work and temporary off-grid setups where you need a compact system that is quick to position and pack away.

Estimated Starlink Mini runtime: approximately 2.0–3.6 hours at an average 25–40W load. Lower-load operation may provide longer runtime. Actual results vary with signal conditions, sky visibility, temperature, Wi-Fi activity, battery condition and conversion losses.

Dry-condition use: this battery stand is for temporary freestanding deployment and is not weatherproof. Keep it dry and protected from rain, standing water and excessive heat.

✅ Choose this battery stand if...

• You want the battery and Starlink Mini stand combined in one portable unit.
• You regularly set up Starlink at campsites, remote work areas or temporary field locations.
• You want a freestanding setup that is quick to deploy and pack away.
• You have the original Starlink Mini pole adaptor, or a compatible replacement.

Choose a different setup if you need a permanent mount, a vehicle-mounted installation, use in strong wind or uneven ground, or substantially longer runtime.

🛰️ Starlink Mini compatibility

This product is designed for the Starlink Mini terminal. It requires the original Starlink Mini pole adaptor supplied with the Mini kit to connect the terminal to the tripod interface. The adaptor is not included.

If you no longer have the original adaptor, see the Starlink Mini replacement pole adaptor. The stand can also be used with the Spacetek multi-purpose quick-release kickstand.

📦 What's included

• 1 × Starlink Mini 99.9Wh tripod battery stand
• 1 × Starlink Mini DC power cable
• 1 × USB-C charging cable
• Instructions and warranty card

Not included: Starlink Mini terminal, Starlink Mini pole adaptor and USB-C PD wall charger.

Shipping note: lithium-battery transport restrictions mean this product ships by road and may arrive separately from other items in your order.

📋 Battery and power specifications

Charging requirement: a USB-C charging cable is supplied. A USB-C PD wall charger is required and is not included.

⏱️ Estimated Starlink Mini runtime

Ideal runtime is calculated from the 99.9Wh battery capacity divided by the Starlink Mini load. Practical estimates allow approximately 10–20% for conversion losses.

Starlink states that Starlink Mini typically uses 20–40W on average. Runtime will vary with network activity, obstructions, signal conditions, temperature, battery age and other operating conditions.

✈️ Airline travel information

The battery is marked 99.9Wh, which is below the common 100Wh threshold applied to many lithium batteries carried by passengers.

Carry it in cabin baggage, protect the ports against short circuit and do not place it in checked luggage. Airline policies and quantity limits vary, so confirm acceptance with your airline before travelling.

🛠️ Setup

1. Place the tripod battery stand on a flat, stable surface in dry conditions.
2. Extend the tripod legs and check that the stand is balanced.
3. Fit the original or compatible Starlink Mini pole adaptor to the terminal.
4. Attach the Starlink Mini and adaptor assembly to the tripod interface.
5. Connect the included DC power cable to the Starlink Mini.
6. Power on the battery and confirm that the Starlink Mini has a clear view of the sky.
7. Recheck stability before leaving the setup unattended.

⚠️ Important safety and use notes

• For portable temporary use only. Do not use as a permanent structural mount.
• Use only on flat, stable surfaces. Do not use on vehicle roofs, moving platforms, uneven ground or in strong wind.
• Keep the battery dry. Do not use or charge it in rain, standing water or when the unit is damaged.
• Do not disassemble, puncture, crush, short circuit or dispose of the battery in fire.
• Protect all ports during storage and travel, and follow the supplied safety instructions.