Starlink Mini Removable Battery - Integrated Clip-On

Specifications

Integrated clip-on battery pack for Starlink Mini. Clean portable power with no loose cable between the battery and the Starlink Mini during use.

The Starlink Mini Removable Battery is a compact lithium power module designed to attach directly to the rear of the Starlink Mini terminal. It keeps the setup neat, portable and quick to deploy, making it useful for camping, short backup-power use, temporary field work and mobile internet setups while stationary.

Important shipping note: this product contains a lithium battery and can only be shipped by road freight. It may arrive separately from other products ordered in the same transaction.

🔌 Charging Tip : Battery will come flat or nearly flat. Before first using this battery, charge the battery to full using the Starlink Mini AC Power Adaptor . It is normal for the charging indicator to jump up and down in the first hour when the battery is new. The first full charge may take 4-5 hours with the Starlink Mini AC power adaptor. 

For 12v Power, our 100w USB-C PD Adaptor Starlink Mini Kit is comptible

Package Includes:

127.75wh Integrated Clip-On Battery
1m Starlink Mini DC-DC Cable for charging battery (AC source or 12v Power Supply with up to 30v 2amp) 
1m USB-C <> USB-C cable for charging of other peripheral devices from USB-C Out (phone, tablet etc) 

Key Features

• ✅ Integrated clip-on design - attaches directly to the Starlink Mini for a clean all-in-one setup.
• ✅ No loose Starlink power cable during use - the battery connects directly to the Mini rather than sitting beside it as a separate power bank.
• ✅ 127.75Wh lithium battery capacity - higher-capacity pack for extended portable operation.
• ✅ Removable battery module - remove it for charging, transport or storage.
• ✅ USB-C PD support - USB-C PD rated up to 45W max as marked on the unit.
• ✅ Matched Starlink Mini style - white housing designed to suit the Starlink Mini enclosure.

Estimated Starlink Mini Runtime

Runtime depends on Starlink Mini power draw, signal conditions, sky visibility, temperature, Wi-Fi activity, battery age and conversion losses. The figures below are estimates only.

For most real-world Starlink Mini use, allow roughly 2.5 to 4.5 hours depending on conditions. Longer runtime is possible in lighter-load conditions; heavy use, poor signal, cold weather or frequent obstruction searching can reduce runtime.

Installation Overview

1. Power down the Starlink Mini terminal.
2. Align the battery module with the rear interface of the Starlink Mini.
3. Secure the battery into position until fully seated.
4. Power on the Starlink Mini.
5. Recharge the battery using a compatible charger/cable setup as required. Note the charging port is the DC port on the underside of the unit. 
   

Important Notes

• ⚠️ Lithium batteries must be shipped by road freight only.
• ⚠️ This battery is over 100Wh, so airline carriage may be restricted. Check with your airline before travelling.
• ⚠️ Do not expose the battery to water unless installed in a protected environment.
• ⚠️ Do not modify, crush, open or disassemble the battery housing.
• ⚠️ Do not heat above 60°C or incinerate.
• ⚠️ Use only compatible, certified charging equipment within the rated limits.

Best Suited For

• ✅ Compact portable Starlink Mini setups
• ✅ Camping, caravan and temporary field deployments
• ✅ Short backup-power use
• ✅ Clean setups where you do not want a separate loose power bank beside the Mini

Need a freestanding battery base instead? If you want the battery to act as a tripod-style base rather than clipping directly to the Starlink Mini, see the Starlink Mini Tripod Battery Stand - 99.9Wh Lithium Power Base.