Starlink Mini DC-DC Power Regulator Booster (8–30V DC to 35V DC, 3A, IP67)

Specifications

Starlink Mini DC-DC Power Regulator Booster for 12V and 24V setups

Run your Starlink Mini from a vehicle, caravan, camper, marine or off-grid DC power system with a stable, regulated 35V DC output. It's built for installs where battery voltage fluctuates or the cable run is longer than a simple portable setup.

Unlike many generic 30V boosters, this unit outputs 35V DC. The extra headroom supports longer DC cable runs and inline accessories between the power source and the Mini, such as our inline wireless relay. It is CE and RCM certified and has passed IP67 dust and water testing to IEC 60529.

✅ Choose this if

• You want to power a Starlink Mini from a 12V or 24V vehicle, battery or off-grid DC system.
• You need to manage voltage drop across a longer Starlink Mini DC cable run (beyond the standard 15 m, when correctly wired).
• You're building a caravan, 4WD, canopy, battery-box, marine or portable Starlink Mini power setup.
• You have a Starlink Mini. This booster is not for Starlink Standard (Gen 3 / V4) or Gen 2 systems.

Choose the right variant

Cigarette Lighter Plug: best for quick portable use from a suitable vehicle socket or temporary travel setup, where your socket and wiring can handle the Starlink Mini load.

50A Anderson Plug: best for cleaner caravan, 4WD, canopy, battery-box and off-grid installs, or anywhere you already use Anderson-style DC connections or want a more permanent power path.

📏 Specifications

• Input voltage: 8–30 V DC
• Output: 35 V DC regulated, 3 A
• Connection: cigarette lighter plug or 50A Anderson plug
• Recommended fuse: 5–10 A inline
• Maximum operating temperature: 70 °C
• Ingress protection: tested to IP67 (dust-tight, temporary water immersion) to IEC 60529
• Cable support: standard 15 m Starlink Mini cable, plus extended runs beyond 15 m when correctly installed
• Compliance: CE and RCM certified; AS/NZS CISPR 32:2015
• Compatibility: Starlink Mini only

📦 What's included

• 1 × Starlink Mini DC-DC booster with your selected connector (cigarette lighter plug or 50A Anderson plug)

Not included: Starlink Mini, Starlink Mini DC cable, inline wireless relay, battery or power source, wiring, fuse, fuse holder or installation hardware.

🛰️ Don't have Starlink yet? Your Starlink kit isn't included. Order it direct from Starlink through our referral link and you may be eligible for Starlink's current referral offer.

🛠️ Setup path

Battery or 12V/24V DC source → suitable fuse and wiring → Spacetek DC-DC booster → optional Spacetek inline wireless relay → Starlink Mini DC cable → Starlink Mini

Before installing, confirm your cable route, power-source rating, fuse location and connector choice.

⚠️ Important installation notes

• Use an appropriate fuse and wiring for your power source and installation.
• Where possible, mount the booster inside a cabin, canopy, battery box or other sheltered spot, away from direct sun and spray. It's tested to IP67, so it can be mounted outside if your install needs it, but keeping electronics sheltered helps them last longer.
• Check cable length and routing to manage voltage drop and avoid strain on connectors.
• If you're unsure about wiring, fusing or connector suitability, use a suitably qualified installer.

Need help choosing the right setup?

Spacetek can help you match the booster, relay and cable path to your Starlink Mini install before you order. Helpful guides:

• Why Untested DC-DC Boosters Need Weather Protection
• Why RCM Compliance Matters for Starlink Mini DC-DC Boosters