IP65 In-line Wireless Relay for Starlink Mini & Gen 3 - Control Starlink Power Remotely

Specifications

🔘 IP65 remote power control for Starlink Mini and Gen 3 DC setups

The Spacetek IP65 Waterproof In-line Wireless Relay lets you switch compatible Starlink Mini and Starlink Standard (Gen 3 / V4) DC power setups on or off using the included remotes.

It is designed for outdoor, canopy, caravan, 4WD, marine and off-grid installs where the relay may be exposed to dust or weather, while still keeping power control convenient from inside the vehicle, caravan or cabin. 

Pair this product with our 12>35v Starlink Mini Voltage Regulator / Booster for maximum performance on off-grid setups.

✅ Use this if

• You want remote on/off control for a compatible Starlink DC power setup for complete circuit deactivation. 
• Your requirement need an outdoor IP65-rated enclosure for dust and water-resistance in exposed installations.
• Your system is within the DC 8–80V input range shown on the relay.
• Your load does not exceed 30A resistive.
• You want an in-line relay kit with two wireless remotes and DC power leads.

⚡ Power compatibility

• Input voltage: DC 8–80V.
• Maximum load: 30A resistive.
• Wireless frequency: 433.92MHz.
• Designed for compatible Starlink Mini and Starlink Standard (Gen 3 / V4) DC power accessories where the connector, voltage and load are suitable.

☔ IP65 waterproof relay housing

• IP65-rated relay enclosure for dust protection and water-resistant outdoor mounting.
• Protected glanded input and output cable exits help protect the relay body from weather exposure and water ingres.
• Mounting holes on the relay body allow the unit to be fixed into a suitable location on your vehicle or structure.

📦 What's included

• 1 x IP65 in-line wireless relay unit with input and output leads.
• 2 x wireless remote controls.
• 2 x key clips.
• 1 x DC power cable/adaptor lead as pictured.
  
• 1 x Instruction Manual
• Not included: wiring beyond the pictured lead, fuse, terminals, installation labour or Starlink equipment.

⚠️ Installation notes

• Check your power supply voltage, connector type and load before installation.
• Do not exceed the rated voltage or current.
• Use suitable cable size, fusing and weather-safe mounting for the installation location.
• This product controls DC power only. It does not change Starlink service, network settings or app controls.
• If unsure, contact Spacetek before ordering so we can help check compatibility with your setup.

🇦🇺 Spacetek support

Spacetek focuses on practical Starlink and low-voltage accessory setups for Australia and New Zealand. If you are unsure whether this relay suits your install, contact us before ordering and we can help check the product fit.