Gen 2 Gear Guide: Top Accessories for Your Starlink System

Optimising Your Starlink for Australian Conditions

Starlink Gen 2 accessories are essential components that transform your basic satellite internet setup into a robust, reliable system capable of withstanding Australia's demanding conditions. Here are the key accessories you need:

• Secure mounting solutions - Wall/eave mounts, pole adapters, and specialised brackets for different building types
• DC power supplies - Efficient 12V/24V systems that eliminate the need for AC inverters
• Connectivity adapters - SPX to RJ45 converters that preserve cable integrity
• Weather-resistant hardware - Corrosion-resistant materials designed for Australian climates

The popularity of Starlink has soared among rural Australians, remote workers, and travellers seeking reliable internet connectivity. However, Australia's harsh weather conditions—from coastal salt spray to extreme heat and high winds—demand accessories that go beyond standard solutions.

Standard Starlink hardware works well in controlled environments, but Australian conditions require purpose-built accessories. Generic mounting systems often fail due to rust and poor roof compatibility, whilst inadequate power solutions can lead to system failures in mobile setups.

SpaceTek's custom-engineered accessories address these specific challenges. Our mounting systems feature corrosion-resistant materials and designs that accommodate Australia's diverse roofing styles. The DC power solutions eliminate energy waste from AC inverters, crucial for off-grid and mobile applications where power efficiency matters.

Whether you're installing Starlink at a remote property, setting up connectivity for mining accommodation, or equipping your caravan for extended travel, the right accessories ensure optimal performance and longevity.

I'm Aaron Wroblewski, founder of SpaceTek Australia, with over 25 years of experience in remote communications and satellite systems. Having witnessed countless failures with poorly designed mounting systems in Australian conditions, I developed our Starlink Gen 2 accessories range specifically to address the unique challenges faced by Australian users.

Essential Starlink Gen 2 Accessories for Peak Performance

To achieve peak performance, your Starlink Gen 2 setup needs more than just the standard dish and router. A suite of high-quality accessories is essential to improve connectivity, improve signal reliability, and ensure optimal system performance. These essential Starlink Gen 2 accessories are especially crucial in Australia's diverse and often challenging landscapes, where standard equipment may not be sufficient.

Secure Mounting Solutions for Every Environment

A secure and stable mounting solution is the foundation of a reliable Starlink connection. The dish's stability directly impacts signal reliability. A robust mount is a necessity in Australia, where weather conditions include intense heat, cyclonic winds, and corrosive coastal air. Our mounting solutions are engineered to withstand high winds, resist corrosion, and integrate with unique Australian building structures. This ensures your Starlink maintains optimal dish performance.

For remote communities and properties, correct mounting is paramount. It helps avoid obstructions and maintains a clear line of sight to the satellites, improving both the speed and consistency of your internet connection. We understand the differences between various Starlink hardware generations; for a detailed comparison, you can read our guide: A Closer Look: Gen 1 vs Gen 2 Starlink Satellite Dishes.

Here are some of our purpose-built mounting solutions:

• Roof Mount for Starlink - Wall / Eave Mount - Gen 2

Our Starlink wall / eave mount kits are specifically designed for easy installation. They allow the Starlink Dish to tightly clip into the top of the mast in its designed form. This means no modifications or drilling into the dish leg is required, and your warranty is maintained.

This mount is an excellent solution for individuals who want to take their Starlink on the road, such as in caravans or for temporary setups. It offers easy access from a short ladder for fast installation and removal, eliminating the need to get on your roof. The mount provides 360mm clearance from the wall and 250mm vertical clearance to clear a gutter line, ensuring optimal positioning without obstruction. It comes with fixings for timber but can also be used with masonry or dynabolts for versatile installation.

More info about the Wall / Eave Mount

• Starlink Atco / Demountable / Site Hut Wall Mount - Gen 2 Rectangle

SpaceTek's Compatible Starlink Wall Mount is engineered to attach to composite wall panels, such as those found on cool room panels and Atco-type demountable buildings, including site huts and mine site accommodation. This robust design incorporates multiple pickup points, which effectively spread the load and wind forces across a larger portion of the wall structure. This also eliminates the need for holes in the roof structure, preserving the integrity of the building.

The mount features 120mm threaded bolts and large square washers, providing a compression-style fixing option for wall panels up to 100mm in thickness. This removes the necessity of fixing to an internal frame, which may be non-existent in cool room panel-type structures. Measuring 1m long, it provides approximately a 500mm rise above the top mounting arm to the Starlink terminal, including the leg of the Starlink itself, ensuring adequate height for signal acquisition.

More info about the Atco / Demountable Mount

• Starlink Flat High Performance Pole Adapter - Advanced

This advanced pole adapter is specifically designed to fit directly to the Flat High Performance Starlink Terminal. It bolts directly to the bottom of the terminal with thumb screws for quick release, making it easy to install and remove. The adapter uses six grub screws to firmly attach to any pole up to 51mm (2 inches) in diameter, with a recommended minimum pole diameter of 38mm.

SpaceTek has engineered this mount to give the terminal a final pitch of 30 degrees. This specific angle is designed to allow the surface of the terminal to naturally clear debris and assist in shedding dirt and bird droppings during rain events that might otherwise accumulate on the surface. This innovative design ensures the terminal remains clean and maintains optimal performance over time.

More info about the Starlink Flat High Performance Pole Adapter - Advanced

Reliable Power and Connectivity for Mobile and Off-Grid Setups

Powering your Starlink in mobile setups, such as RVs, caravans, or off-grid properties, presents unique challenges. Traditional AC inverters, which convert DC battery power to AC and then back to DC for the Starlink system, introduce inefficiencies and unnecessary power loss. This double conversion process can significantly drain battery life and reduce overall system reliability, especially in remote areas where power is a precious resource.

Our solutions are designed to bypass these inefficiencies, providing direct DC power to your Starlink. This ensures a cleaner, more stable power supply, which is critical for maintaining consistent internet connectivity in demanding environments. For more insights into common power supply issues with Starlink Gen 2 routers, you can read our article: Starlink Gen 2 Router Power Supply Failures: What You Need to Know and How to Stay Connected Without Official Support.

Here are our essential Starlink Gen 2 accessories for power and connectivity:

• StarPower V2 12V / 24V - Starlink DC Power Supply

The StarPower V2 12V/24V DC Power Supply is a versatile and robust solution for powering your Starlink Gen 1, 2, or 3 Standard Terminal directly from a dependable DC power source. This includes vehicle batteries, solar setups, or other 12V/24V systems commonly found in mobile and off-grid environments. By eliminating the need for an AC inverter, the StarPower V2 significantly increases power efficiency, reducing energy loss and conserving battery life.

This power supply offers direct power to your Starlink terminal without requiring the standard Starlink router. It is designed to output directly to the WAN input port of your own router, providing a more streamlined and efficient setup. This flexibility allows you to integrate your preferred networking equipment, bypassing the proprietary Starlink router for greater control over your network.

For Gen 2 terminals, the main Starlink cable running from the dish will need modification. This involves cutting the cable to your desired length and terminating it with a Cat6 plug (shielded recommended), following either the T-568B or T-568A standard (T-568B is recommended for consistency with Starlink). Alternatively, our Starlink SPX to RJ45 adapter offers a simpler connection without cutting the original cable. The StarPower V2 is not compatible with High Performance or In Motion/Maritime Starlink terminals.

The StarPower V2 features a broad input voltage range of 11-36V DC, with configurable options up to 45-56V DC, making it adaptable to various power systems. Its dimensions, including mounting tabs, are 160 X 100 X 60mm. It also includes an unregulated DC pass-through via a Phoenix connector for powering your router directly and a PoE LED indicator to monitor the output fuse status, ensuring continuous operation and easy troubleshooting.

More info about the StarPower V2 DC Power Supply

• Starlink SPX plug to RJ45 Adapter

This Starlink Plug adapter is designed to convert the proprietary Starlink SPX plug to a standard Shielded RJ45 Plug. This ingenious solution prevents the need to modify the original Starlink cable, preserving its integrity and making it easier to integrate with our StarPower Power Supply and other sockets, such as our Recessed Data Socket.

By using this adapter, you avoid cutting and re-terminating the Starlink cable, which can be a complex process for some users. This simplifies your setup and ensures that your Starlink cable remains intact for future use or warranty considerations. It includes one Starlink SPX Adapter and one Shielded Patch Lead.

It is important to note that this adapter is NOT waterproof and should not be used in the weather. It is strictly designed for indoor use or within protected enclosures. Additionally, it is NOT compatible with the High Performance or High Performance Flat Terminals.

More info about the SPX to RJ45 Adapter

Why Custom-Engineered Starlink Gen 2 Accessories Matter

Custom-engineered Starlink Gen 2 accessories are not merely an upgrade; they are an investment in the reliability and longevity of your satellite internet system. Unlike generic, mass-produced options, our accessories are purpose-built to address the specific challenges posed by the Australian environment. This focus on design and material science ensures exceptional durability in harsh conditions, from the intense UV radiation of the outback to the corrosive salt spray of coastal regions.

A key benefit of SpaceTek's accessories is their inherent rust resistance. We utilise materials and coatings specifically chosen to withstand Australia's unique climate, preventing corrosion that can compromise structural integrity and aesthetic appeal over time. Furthermore, our mounting solutions are carefully designed to ensure no modifications or drilling into the Starlink dish itself are required. This is critical for maintaining your Starlink warranty, protecting your investment, and ensuring long-term reliability.

By enhancing system performance through secure mounting and efficient power delivery, our accessories contribute to a more stable and consistent internet connection. This translates to fewer dropouts, faster speeds, and a more dependable online experience, whether you are streaming, working remotely, or connecting with loved ones. Investing in high-quality, custom-engineered accessories extends the life of your Starlink equipment, providing peace of mind and ensuring connectivity without compromise. For more information on why custom solutions are superior, refer to our guide: Why Choose Spacetek Mounting Kits: Custom Solutions for Gen 1 & Gen 2 Starlink Dishes. You can also gain further insights into the broader Starlink network from official sources: More on the second generation network.

Rugged Accessories for Tough Australian Conditions

Open uping Starlink's full potential in Australia requires more than just the basic kit; it demands rugged, purpose-built accessories. We at SpaceTek Australia are dedicated to providing custom solutions that empower users across the continent, from busy regional centres to the most remote outback stations. Our commitment is to ensure a stable, reliable internet connection, whether for your home, business, or when you are travelling.

We understand the unique challenges of Starlink in Australia, particularly for remote Australia and remote communities. Our accessories are designed with these specific conditions in mind, offering unparalleled durability and performance where it matters most.

For detailed assistance with your Starlink setup or to discuss custom solutions custom to your specific needs, please do not hesitate to Find an installer or get in touch with our team. We are here to help you achieve seamless connectivity.

To explore our full range of custom Starlink Gen 2 accessories and find how our solutions can improve your internet experience, visit our collection page: Explore our full range of custom Starlink accessories.