Starlink Gen 3, Home Installation Bundle - Mount, Cable, Joiner & Indoor router wall holder

Description

Starlink Gen 3 Home Bundle, comes with roof mount, cable, cable joiner & indoor wall mount for your router. 

A complete fixed-mount residential accessory kit for Starlink home installation, compatible with the Starlink Gen 3 (V4), engineered to deliver a stable, compliant and long-term installation on Australian & New Zealand homes.

⚠️ NOTE : Starlink Gen 3 terminal is NOT included in this bundle and needs to be purchased from Starlink.com or a major retailer.  

Bundle Contains: 

• 1 x Australian Made aluminium Starlink roof mounting kit for either :
  • metal/tin roof (1m) kit OR 
  • wall/eave mounting kit OR or
  • ridge mount kit 
• 1 x SPACETEK powder coated aluminium Starlink Gen 3 pole adaptor. 
• 1 x Premium outdoor rated 15m Cat6 (24AWG) Gen 3 cable. 
• 1 x Waterproof RJ45 Cat6A Cable Joiner (join two cables together)
• 1 x Indoor, integrated wall mount holder for the Gen 3 router (router not included)
• Generic fastener pack (please double check suitability for your specific install) 

Key Features

✅ Roof/Wall Mount Options for Structural Buildings — Choose from tin roof (standard 1m), wall/eave or ridge-cap variants engineered for long-term stability on residential structures.

✅ Premium Outdoor CAT6 Gen 3 Cable (15 m) — UV-resistant, outdoor-rated construction suitable for Australian heat, rain and coastal conditions.

✅ Integrated Router & Power Supply Wall Holder — Consolidates the Gen 3 router and power unit into a single enclosure with concealed cable routing.

✅ Permanent Residential Configuration — Designed for fixed placement, eliminating temporary setups and improving long-term reliability.

✅ Reduced Cable Clutter — Dedicated routing paths and an interior mount improve organisation and reduce strain on connectors.

Installation Overview

1. Identify the correct mounting location based on roof type or wall/eave structure.
2. Mark and pre-drill structural fixing points.
3. Apply appropriate roofing sealant to all penetration areas.
4. Secure the mount using rated fixings for timber or metal substrates.
5. Route the outdoor-rated cable along protected paths to the cable joiner, plug your existing Starlink Cable into one side of the joiner, and our replacement 15m cable to the other. 
6. Install the router/power holder indoors and connect the Gen 3 components.
7. Verify full system rigidity and cable strain relief before powering the terminal.

Important Notes

⚠️ Not suitable for ground or freestanding installations.
⚠️ Ensure all roof penetrations are sealed to prevent water ingress.
⚠️ Spacetek is not liable for improper installation or non-compliant electrical routing.
⚠️ Do not exceed load limits or modify the product.