Starlink Standard (Gen 3 / V4) V-Cell IP68 Rugged Housing

Specifications

The Spacetek V-Cell IP68 Rugged Housing for Starlink Standard (Gen 3 / V4) is a mine-spec protective enclosure for harsh fixed, mobile, marine and industrial environments. It is designed to enclose the flat rectangular Starlink Standard terminal without modifying the Starlink hardware.

Use it when a normal exposed terminal installation is not enough and the dish needs extra protection from dust, heavy rain, spray, vibration, wind exposure and rough operating conditions.

✅ Compatibility note: this product suits the Starlink Standard (Gen 3 / V4) flat rectangular terminal, also commonly called Standard Kit, Standard 4 or V4. It does not suit Starlink Mini, Gen 2 actuated Standard, High Performance or Flat High Performance models unless specifically stated.

Choose this if...

• ✅ You need a sealed protective enclosure for Starlink Standard (Gen 3 / V4).
• ✅ You are installing Starlink in mining, marine, fleet, industrial or remote-site conditions.
• ✅ You want a DIY enclosure that does not require cutting or modifying the terminal.
• ✅ You need flexible mounting options for custom brackets, rails or non-permanent setups.

Key features

• ✅ IP68-style sealed enclosure — designed to help protect against dust, heavy rain, spray and harsh outdoor exposure.
• ✅ No terminal modification required — the Starlink Standard terminal sits inside the housing without cutting or drilling.
• ✅ Stronger than a basic radome — built for demanding installations where a simple cover is not suitable.
• ✅ Flexible mounting options — six pre-drilled mounting holes suit custom setups, optional rails or rubber-coated magnets.
• ✅ DIY installation approach — supplied as a practical enclosure system for competent installers.

Mounting options

The V-Cell housing can be mounted to suitable custom brackets, rails or bases using the integrated mounting points. Optional mounting rails and rubber-coated magnets can be used where a non-permanent setup is required.

Installation overview

1. Inspect the enclosure, seals and mounting points before installation.
2. Place the Starlink Standard (Gen 3 / V4) terminal into the housing without modification.
3. Route cables through the correct sealed entry points.
4. Close the housing evenly and tighten fasteners uniformly.
5. Mount the enclosure to a suitable support structure for the environment and wind load.
6. Use the Starlink app to confirm visibility and performance once installed.

Important notes

• ⚠️ Correct sealing, cable entry and fastening are critical for harsh-environment use.
• ⚠️ The V-Cell does not replace proper structural mounting. The mounting surface and hardware must suit the installation.
• ⚠️ In-motion or extreme-environment use depends on the quality of the mounting system and installer judgement.